Elastic wave fields in a half-plane with free-surface relief,tunnels and multiple buried inclusions

In this work, we study the elastic wave fields that develop in an isotropic half-plane which contains different types of heterogeneities such as free-surface relief, unlined and lined tunnels, as well as multiple buried inclusions. The half-plane is swept by traveling harmonic waves, namely pressure waves, vertically polarized shear waves and Rayleigh waves, as well as by waves emanating from an embedded source. The computational tool used is the direct boundary element method (BEM) with sub-structuring capabilities. Following development and numerical implementation of the BEM, two stages of work are performed, namely a detailed verification study followed by extensive parametric investigations. These last numerical simulations help determine the dependence of the elastic waves that develop along the surface of the half-plane, as well as of the dynamic stress concentration factors in the different types of buried inclusions, to the following key factors: geometry of the free-surface relief, geometry, depth of burial and separation distance of the inclusions, wavelength to inclusion diameter ratio and dynamic interaction phenomena between the multiple heterogeneities. In closing, the potential of the enhanced BEM formulation to treat dynamic soil-structure-interaction problems with the kind of complexity expected in realistic engineering applications is discussed.     

How accurately do drivers evaluate their own driving behavior? An on-road observational study

Self-assessment of driving skills became a noteworthy research subject in traffic psychology, since by knowing one's strenghts and weaknesses, drivers can take an efficient compensatory action to moderate risk and to ensure safety in hazardous environments. The current study aims to investigate drivers’ self-conception of their own driving skills and behavior in relation to expert evaluations of their actual driving, by using naturalistic and systematic observation method during actual on-road driving session and to assess the different aspects of driving via comprehensive scales sensitive to different specific aspects of driving. 19–63 years old male participants (N = 158) attended an on-road driving session lasting approximately 80 min (45 km). During the driving session, drivers’ errors and violations were recorded by an expert observer. At the end of the driving session, observers completed the driver evaluation questionnaire, while drivers completed the driving self-evaluation questionnaire and Driver Behavior Questionnaire (DBQ). Low to moderate correlations between driver and observer evaluations of driving skills and behavior, mainly on errors and violations of speed and traffic lights was found. Furthermore, the robust finding that drivers evaluate their driving performance as better than the expert was replicated. Over-positive appraisal was higher among drivers with higher error/violation score and with the ones that were evaluated by the expert as “unsafe”. We suggest that the traffic environment might be regulated by increasing feedback indicators of errors and violations, which in turn might increase the insight into driving performance. Improving self-awareness by training and feedback sessions might play a key role for reducing the probability of risk in their driving activity.     

Nanostructure and mechanical properties of aromatic polyamide and reactive organoclay nanocomposites

Aromatic polyamide/organoclay nanocomposites were synthesized using the solution blending technique. Treatment of montmorillonite clay with p-phenylenediamine produced reactive organophilic clay for good compatibility with the matrix. Polyamide chains were prepared by condensing a mixture of 1,4-phenylenediamine and 4-4′-oxydianiline with isophthaloyl chloride under anhydrous conditions. These chains were end capped with carbonyl chloride using 1% extra acid chloride near the end of reaction to develop the interactions with organoclay. The dispersion and structure–property relationship were monitored using FTIR, XRD, FE-SEM, TEM, DSC and tensile testing of the thin films. The structural investigations confirmed the formation of delaminated and disordered intercalated morphology with nanoclay loadings. This morphology of the nanocomposites resulted in their enhanced mechanical properties. The tensile behavior and glass transition temperature significantly augmented with increasing organoclay content showing a greater interaction between the two disparate phases.     

UV-enhanced toxicity of water-stable quantum dots in human pancreatic carcinoma cells

Zn-based (capped with thioglycolic acid (TGA) or 3-mercaptopropionic acid (MPA)) and Cd-based quantum dots (QDs) (capped with TGA or L-glutathione), were synthesised and used to investigate their cytotoxicity to human pancreatic carcinoma cells (PANC-1) in absence and presence of UV irradiation. Zn-based QDs exhibited less intrinsic cytotoxicity than the Cd-based QDs, however, the excitation of 50?µg/mL-QDs using UV lamp significantly enhanced the cytotoxicity of both QDs. After 15?min of UV irradiation, the viability for cells exposed to Cd-based QDs capped with TGA or glutathione was 49%?±?6% or 56%?±?3%, respectively. The corresponding cell viability in the control test was 83%?±?8% after 15?min of UV irradiation. In turn, the viability for cells exposed to Zn-based QDs capped with 3-MPA or TGA was 64%?±?3% and 52%?±?3%, respectively, after 30?min of UV irradiation; the cell viability in the control test was 80%?±?7% for the same UV irradiation time. Laser scanning confocal analyses evidenced that QDs can be easily ingested by PANC-1. Based on their good compositional stability, Zn-based QDs capped with 3-MPA can be considered a promising material for nanomedicine applications until concentrations of 200?µg/mL.     

Iron deficiency enhances bioactive phenolics in lemon juice

BACKGROUND This study was designed to describe the phenolic status of lemon juice obtained from fruits of lemon trees differing in iron (Fe) nutritional status. Three types of Fe(III) compound were used in the experiment, namely a synthetic chelate and two complexes derived from natural polymers of humic and lignine nature. RESULTS All three Fe(III) compounds were able to improve the Fe nutritional status of lemon trees, though to different degrees. This Fe(III) compound effect led to changes in the polyphenol content of lemon juice. Total phenolics were decreased (～33% average decrease) and, in particular, flavanones, flavones and flavonols were affected similarly. CONCLUSION Iron‐deficient trees showed higher phenolic contents than Fe(III) compound‐treated trees, though Fe deficiency had negative effects on the yield and visual quality of fruits. However, from a human nutritional point of view and owing to the health‐beneficial properties of their bioavailable phenolic compounds, the nutritional quality of fruits of Fe‐deficient lemon trees in terms of phenolics was higher than that of fruits of Fe(III) compound‐treated lemon trees. Moreover, diosmetin‐6,8‐di‐C‐glucoside in lemon juice can be used as a marker for correction of Fe deficiency in lemon trees. Copyright © 2011 Society of Chemical Industry     

Automatic searching and evaluation of priority and emerging contaminants in wastewater and river water by stir bar sorptive extraction followed by comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

A new analytical method based on stir bar sorptive extraction (SBSE), followed by comprehensive two-dimensional gas chromatography (GCxGC-TOF-MS), has been developed for the automatic searching and evaluation of nonpolar or semipolar contaminants in wastewater and river water. The target compounds selected were 13 personal care products (PCPs), 15 polycyclic aromatic hydrocarbons (PAHs) and 27 pesticides. Excellent results have been obtained in terms of separation efficiency and also in terms of compound identification. Exceptional method detection limits were achieved applying the optimized method, at or below 1 ng/L for most of the compounds in real samples. The reliable confirmation of analyte identity was possible at this low concentration level, even for typically troublesome compounds such as the PAHs. The other validation parameters were good. In addition to obtaining analytical information such as identification and quantification of target analytes, it is also possible to screen for nontarget compounds or unknowns. New contaminants have been identified in the wastewater effluents and river water samples, such as cholesterol and its degradation products, pharmaceuticals, industrial products, other pesticides, and PCPs. The multidimensional information generated by the instrument can also be used by the researchers for contrasting samples and identifying, much more easily, the major differences between samples. We have used this feature to propose studies of comparison between the fingerprinting of different water samples, such as the contamination variation along a river affected by the discharge of urban wastewaters and also the contamination variation over a period of time in the effluent. Results show that the most frequently detected contaminants (and the contaminants detected at higher concentrations) were the PCPs. The musk fragrances galaxolide and tonalid were the most concentrated compounds in the samples. The pesticides and PAHs were present at much lower concentration than PCPs.     

Fumonisin-producing strains of Fusarium: a review of their ecophysiology

This review focuses on the fumonisin-producing Fusarium species and the ecophysiology of these species. The effects of environmental biotic and abiotic factors on germination, growth, and fumonisin B1 production by Fusarium verticillioides and Fusarium proliferatum have been investigated under laboratory, field, and storage conditions. An understanding of the factors involved in production of fumonisins is the first step in preventing accumulation of these toxins.     

Biodegradation of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) by Phanerochaete chrysosporium: new insight into the degradation pathway

Octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) is a recalcitrant energetic chemical that tends to accumulate in soil, close to the surface. The present study describes the aerobic biodegradability of HMX using Phanerochaete chrysosporium. When added to 7 day old static P. chrysosporium liquid cultures, HMX (600 nmol) degraded within 25 days of incubation. The removal of HMX was concomitant with the formation of transient amounts of its mono-nitroso derivative (1-NO-HMX). The latter apparently degraded via two potential routes: the first involved N-denitration followed by hydrolytic ring cleavage, and the second involved alpha-hydroxylation prior to ring cleavage. The degradation of 1-NO-HMX gave the ring-cleavage product 4-nitro-2,4-diazabutanal (NDAB), nitrite (NO2 -), nitrous oxide (N2O), and formaldehyde (HCHO). Using [14C]-HMX, we obtained 14CO2 (70% in 50 days), representing three C atoms of HMX. Incubation of real soils, contaminated with either HMX (403 micromol kg(-1)) (military base soil) or HMX (3057 micromol kg(-1)), and RDX (342 micromol kg(-1)) (ammunition soil) with the fungus led to 75 and 19.8% mineralization of HMX (liberated 14CO2), respectively, also via the intermediary formation of 1-NO-HMX. Mineralization in the latter soil increased to 35% after the addition of glucose, indicating that a fungus-based remediation process for heavily contaminated soils is promising. The present findings improve our understanding about the degradation pathway of HMX and demonstrate the utility of using the robust and versatile fungus P. chrysosporium to develop effective remediation processes for the removal of HMX.     

Voltammetric stability of anodic films on the Ti6Al4V alloy in chloride medium

The biocompatibility and mechanical integrity of Ti and Ti6Al4V alloy can be affected by corrosion processes. This paper presents studies on the stability of anodic oxide films on Ti6Al4V and Ti in chloride medium. The oxides were grown potentiodynamically up to 8.0 V in the phosphate buffer saline (PBS) solution (pH 6.8) at 25 and 37 °C. The morphology of the obtained anodic oxides and the type of corrosion that occurred were analyzed by SEM–EDS. The Ti6Al4V alloy presented less corrosion resistance than pure Ti. Elemental analyses showed that the decrease of the alloy corrosion resistance is due mainly to the corrosion of Al.     

Indirect determination of carbohydrates in wort samples and dietetic products by capillary electrophoresis

The first total separation by electrophoresis of five carbohydrates, sucrose, maltotriose, maltose, glucose and fructose, is described. The basic technique requires 1‐naphthylacetic acid as background electrolyte at pH 12.5, indirect UV detection at 222 nm, with a capillary of 75 µm × 120 cm and a voltage of 25 kV. Linear calibration curves from 50 to 400 mg l^?1 with a good correlation coefficient were obtained. The method has been used to determine carbohydrates during the brewing process of a non‐alcoholic beer and also to analyse the carbohydrate content of dietetic fruit juices and chocolate. Copyright © 2004 Society of Chemical Industry